Version 3.5.1.16

New Features

For All Hardware Platforms:

• An Onvif video plug-in is now available.
  
  

Unique to Keri PXL Controllers:

• A database conversion process is now available to transfer Doors32/PXL databases into Doors.NET. Please contact your RSM or Keri Inside Sales person for database conversion information and pricing.

Note: Doors32/PXL-based sites with the following types of controllers are not eligible for conversion to Doors.NET at this time.

• Entraguard telephone entry controllers (including mixed PXL and Entraguard sites)
• PXL-510 controllers for alarm panel control
• LC-502/-508 controllers for elevator control
• Obsolete PXL-250 controllers
  
  

Unique to Keri NXT Mercury Powered Controllers (MSC):

• Added support for ASSA Aperio K100 Cabinet Locks.
• Provided support for Ingersoll Rand AD-300 Networked Locks.
  
  

Unique to Mercury Hardware:

• None at this time.
  
  

Program Improvements

For All Hardware Platforms:

• Simplified the menu options for setting Activation Date and Time, and for Deactivation Date and Time.
• Corrected a video grid refresh issue when working with video cameras that prevented multiple selection/de-selection of cameras unless you exited and then re-entered the video grid.
• Set the software installation program to exit immediately if the PC operating system cannot be identified.
• Corrected a date-check issue with appointment schedules that would not allow an appointment schedule to cross midnight.
• Added the ability to show/hide Alerts in the operator permissions grid.
• Modified the License Manager to allow Demo mode to activate regardless of the availability of an Internet connection.
• Changed the Block Enrollment default for credential access from "Total Access" to "Unassigned."

Unique to NXT Controllers:

• None at this time.

Unique to PXL Controllers:

• Corrected the message displayed if a PIN is not entered when in dual verification mode from "No Second Card" to "No PIN Entered."

Unique to Keri NXT Mercury Powered Controllers (MSC):

• Added a pop-up window to confirm the configuration of Exit Readers.

Unique to Mercury Hardware:

• Corrected an issue where the Update Network icon was not made available to Mercury hardware.
• Corrected a hardware configuration grid refresh issue where the grid would continue to show a Network Update was required following resetting an AP controller.

Known Issues

• None at this time.

Firmware Requirements

For NXT controllers and peripherals:

• Standard NXT controllers require current firmware revision 2.05.23.
• NXT controllers with Mercury Inside firmware require current revision 1.01.40.
• NXT Readers require current firmware revision 3.01.01.
• Reader Interface Modules (RIMs) require current firmware revision 3.02.05.
• 4x4 I/O Modules require current firmware revision 3.00.02.

For PXL:

• PXL controllers require current firmware revision 8.6.04
• Legacy PXL controllers should be at firmware revision 8.4.49 or greater
  (this minimum firmware revision is programmed with the current U.S. Daylight Savings Time dates)
  

Note: Legacy PXL controllers require the PXL Gateway license to be used with Doors.NET software.

For Mercury Inside (MSC) NXT controllers:

• MSC NXT controllers require current MSC firmware revision 1.01.40.

Firmware Upgrades

None at this time.

Translations

Completed Translations:

• Chinese (Simplified)
• Chinese (Traditional/Taiwan)
• English (UK)
• French (France)
• Polish
• Russian
• Slovenian
• Spanish (Castilian)
• Turkish
  
  

Translations Pending Updates *:

• Arabic (UAE)
• Dutch (Belgium)
• French (Belgium)
• Italian

* These translation file sets are not yet complete pending submissions from our translators. If you use these translations you will find mislabeled and/or non-translated ribbon and menu fields in some sections of the program. Non-translated fields will be displayed in US English.